Bryan's Christmas Pants 2020

I spent a lot of time at fabric stores purchasing mask fabric this year.  Every time I had to actually go in to JoAnn's I noticed this Nightmare Before Christmas fuzzy fleece fabric.  I'm not usually a fan of this thick polyester stuff but I just kept thinking about what I could make for Bryan out of this fabric. I eventually realized that his comfy Storm Trooper pants were a little worse for wear and he could probably use another pair of fleece pants for around the house...this is the perfect project for that fabric! 

I picked up this pajama pant pattern from Seams Fabric called the Eastwood Pajamas by Thread Theory.  They have 3 options varying in difficulty for these pants, of course, I did the most complicated pattern knowing that I would learn something about garment making along the way. Bryan is really tall and pants are a hard fit for him, especially in a tall and skinny fit. While making these I added 3 inches to the length of the leg in this pattern so they wouldn't be waders like his other ones.

I usually think I know more than I do when I start making a piece of clothing. I read through the directions a number of times, looked for some videos online, tried to visually prep myself.

All the parts of the fly were really confusing to me.  I know that I need to follow the pattern line by line and that it'll eventually make {more} sense than if I was to try to do it without a pattern. I cut all the pieces I needed but I still wanted a better visual.  Thankfully Thread Theory has a blog and posts their pattern details. This particular post was SO helpful in making these pants: https://blog.threadtheory.ca/2018/08/08/eastwood-pajamas-sew-along-day-3/

Now since I was using much heavier fabric than the pattern calls for I had already decided not to create a button-fly, just one where the fly would open/be useful.  It still didn't make sense with all of the pieces but I pushed forward. I turns out I could do one less layer of fabric since I didn't need to hide a button in the fly, which is good because the fabric thickness was building up fast. 

(The really important thing on the above step was to stitch the rectangle panel only to the right edge of the inside hem, not through all the layers because that would close up the fly)

Pinning fly for top-stitching 

Pockets!

I was not going to put in the extra work into making the tie out of the same fabric. After looking at grosgrain ribbon options and other ideas I ultimately decided using the current fabric would be the best thing. I cut a 2-inch wide strip and folded it in on itself, pinned it and zigzag stitched it.

Button-hole stithced around the tie-holes

I still need to finish the bottom hem of the pants but I think they're a hit.

Winding Warp #2 for "Is There a Thing to Which Brings Us Less Joy Yet We Devote More Time"

I figure I'll try to video most of this weaving process in time lapse, just for fun.  Here's another 2+ hours of warp winding. I remember to stop and do some stretchs this time. I do not remember to count at the end of winding the grey so there's some backing up and re-winding on to the ball of thread. 

 The colors for this second warp are grey with pops of citrus colors. There's more information on the first warp winding post for this weaving HERE. 

Winding Warp #1 for "Is There a Thing to Which Brings Us Less Joy Yet We Devote More Time"

 

This piece is probably 2 or more years in to the thought/design process. These start by floating around in my head and in sketchbooks before I finally getting around to drafting the design, printing/taping it and choosing colors to then starting to wind the warp.  2020 seems to be a good time for the culmination of this piece as we have become more dependant than ever on keeping in touch through Zoom, social media and having a general dependance on the internet; yet it also becomes the thing that can mess with our psyche the most.

As far as color I wanted to go dark on this piece, I even thought about black on black but I'm not up for driving myself crazy while weaving in 2021. I decided on a black warp and a grey warp. I also have to admit to myself that there are some little, occasional, bursts on positive things that happen over social media so I picked a few colors to put into each warp.  Just one strand every 10 or so ends. 

The above time lapse video is 2 hours into 3 minutes.  I'm winding the first warp and the strands of color that will go into this warp. You can also tell when I'm counting warp threads that I'm watching TV (Blacklist, so good).  Even with a warping wheel winding the warp is a tedious process. 

I made a small sample wrap to get a color idea before I started winding this warp.  I rarely do this, but I'm not used to working in black and grey with little other color.  The sample shows the color coming in every 7th warp but I decided I want them more spaced-out so it's about double the amount of black between the strands.

Once I have 3-4 solid hours I'll get the next warp wound. 

Design Process: Putting Together My Cartoon

 

This is my very first time lapse video! So bear with me as it's not the most flattering view, but it's about an hour of work sped up 30x showing how I put together the cartoon for my next weaving. 

I started by designing this in Photoshop.  Once I have the file layers merged and resized to the width of my warp I'm ready to print.  I could take the file over to Staples and have them print it out on one big sheet, but I've found that cutting and taping the cartoon together helps me get to know what's going on with the image that I'll be looking at under my warp. I can also make any alterations to the design at home on the spot. 

So I guess here's a sneak peek of the design for my next piece.  I have not finished the large Leaf Me Alone piece yet, I needed a break from it, along with a change of color. 

Angle Color Block Bangle and Earrings

I was quarantined at home last week after spiking a fever and having to get the COVID-19 nose-swab. While I waited to get my results back to get back to work (they were negative) I had some time to flush out this bangle pattern.  I had pulled the brown and white beads aside months ago but I kept having mask orders come in so the beads and the idea were set aside. Between naps and watching all of the Star Wars movies in a row I got this bangle and earring set completed.

It's not perfect, the one end doesn’t quite line up like it should but I wore it one day and never noticed so it's not a huge bother.  This design translated to earrings easily and I am really happy with the set. 

I had decided I didn't want the earrings to be too ridiculously long. So I created the first pair without the brown bottom block.  My curiosity got the best of me and I decided to make a long version too. It turns out that I like the longer version so much that I'm keeping it in my at-home stock so I can wear them whenever I want.  The long earrings ended up being 3.25 inches from tip of earwire to the bottom of the earring. One of the reasons I'm really into long earrings right now is that they still stick out when you're wearing a mask all day. You could still see these despite my mask, beanie and pigtails at work yesterday. 

The bangle and shorter (2.75 inches) set of earrings went over to the Lansing Art Gallery today. You can shop online with the Lansing Art Gallery now and also make an appointment on their website to shop in-person. Make a shopping appointment HERE.  Gallery online shop is HERE. I also dropped of the 70's-inspired rainbow bangle and 2 of the earrings set today. 

Me wearing the extra-long ones, getting ready for work yesterday,